![]() Don't know if that makes any difference to the BIOS coding or not. HP 518174-005 ProLiant ML150 G6 Server MPN, UPC 884420743644, 2 Processor Support - 2 GB Standard/24 GB Maximum RAM - 250 GB HDD - DVD-Reader - Serial. I forgot to mention this is a dual socket board, currently only using 1 socket for the E5504, but I plan to run both sockets with a W5590, if there is a successful BIOS unlock for them. !695&authkey=!AGjJCq8HqBvydzU&v=3&ithint=photo%2cjpgĬan the CPU microcode be enabled in the BIOS to allow the W5590? Does the BIOS know I only have a 430W power supply, and expect to see the 750W optional power supply to enable this upgrade? !696&authkey=!AHX8圆RFtzDOLUY&v=3&ithint=photo%2cJPG Processor family is consistent specs/voltages across current CPU, Max recommended CPU by HP, and the W5590 I want to use, the only difference being the chip I want to use has the 130W TDP versus the 80W TDP on the current and recommended CPUs. I can instantly swap the E5504 back in and it boots fine. When I install the W5590, the system powers on and fans go to full speed, and then it begins flashing the "system health" light on the front of the tower, which is normally solid green, it now flashes red, and the system will not post. ![]() I am trying to upgrade to Xeon W5590, 3.33GHz, 45nm, 130W TDP It currently has the Xeon E5504, 2GHz, 45nm, 80W TDP ![]() It is based on the Intel Xeon 5500 series CPUs. I was recently given this server, and have been updating it to a more robust state.
0 Comments
Leave a Reply. |